Bigfoot Scroll Saw Pattern.

Yes, I know this is a silly pattern. There will be at least one guy living in the mountains of Washington state who thinks its funny. That's good enough for me. At least the price is right.

The bigfoot, foot is about nine inches long. 

Are You Square?

It is important that the blade is 90 degrees to the table when you make a cut. This keeps the pieces that you cut from being wedge-shaped. There are several ways to check for square. Some use a small machinist square. Others use a protractor but there is one very accurate techniques that does not require any extra tools.

 

 Grab a scrap piece of wood. It's helpful if it is at least 3/4" thick.

Make a cut on one edge of the board. Just cut into the board about 1/8".

Rotate the board around to the back of the blade.

If the blade will slide into the cut then the blade is square. You see in the picture above that the blade and cut do not line up.

Make a small adjustment to the blade angle and do another small cut.

Rotate the board and check to see if the cut and blade line up now.

After one correction the blade lined up perfectly with the cut. We are now square and ready to begin cutting. 

Most of the time you will get the blade square with only a couple of fine adjustments. 

Here is another tip that will make the adjustment correct on the first attempt.

Line the blade up with the bottom of the angled test cut. Note the gap at the top of the test cut and the blade.

Rotate the blade half the distance of the gap noted above.

Recheck and you should be perfect. 

Do you sell your scroll saw projects online?

Buy on Amazon

If you sell your products online it is critical that the photos be excellent. It has been proven that bad photos equal bad sales. 

Today's smartphones have excellent cameras but they are useless if the environment of the picture is bad. The easiest way to have a perfect environment for your photo is a light tent. The light tent will give you perfect lighting and a clean background.

I recently upgraded my light tent to the one above. I am very pleased with it. It comes with daylight balanced 5600k LED lights. The LED lights are internal to the tent. My old tent had external lights and that always caused trouble. These LEDs are very bright.

This tent is a large 25" X 30" X 25". It has an opening on the top for straight down shooting and of course the front. The front has a flap with a small opening to block out exterior light if needed.

This tent has improved my product photos a great deal. This is an Amazon Choice product and gets on average 4.5-star reviews. 

If your product photos are anything but perfect then consider upgrading your equipment. This tent will pay for itself in extra sales.

Click to Order

$12 per sheet of 12 coins plus $3.50 shipping

Inlay with a 1" Forstner Bit.

The perfect way to sign your work.

Video Demonstration Link

- -

Email Newsletter Readers: Remember that the Newsletter is just a copy of the daily blog post. To see the post in it's proper formatting click this link. If you ever misplace a pattern or any item you see here you can always find it on the blog. Everything stays on the blog forever. 

www.scrollsawworkshop.blogspot.com

Products for your consideration:

Every Scrollsaw Workshop Pattern from 2007-2018 in DVD

Purchase the entire Scrollsaw Workshop pattern catalog for offline access.

This DVD has over 2,600 patterns published from 2007 thru 2018.
The DVD is $20 plus shipping. Ships to 60 countries around the world.

Click here to Order. 

If you use the DVD on a Windows PC there is a simple viewer program to browse through the patterns.

The DVD also works fine on a MAC. The viewer program is not MAC compatible but there is an included PDF with all the patterns shown as thumbnails for easy viewing.

Don't have a DVD drive on your new computer. No problem. Buy the catalog on a USB thumb drive.
All the same file but on an easy to use a thumb drive. The USB thumb drive option is $23 plus shipping.

Buy Now. 

Scroll Saw Pattern Design Tutorial: DVD
Let me teach you to create a beautiful wooden portrait pattern. I will show you everything you need from start to finish. The video will show you the free software program you can download for Windows or Mac OS. I will show you how to install the program and configure it for best results. 

Then I will show you the technique to take your photograph and make a pattern from it. When the pattern is complete we will go in the shop and cut it.

The DVD is $10 plus shipping. This is a data DVD that you will use on your computer to watch the video tutorial  

Unique Wooden Vases:
Want to create beautiful wooden vases on the scroll saw?

My two "Wooden Vases on the Scroll Saw" books make it easy.

The books are $12 each and available for instant download after purchase. Click for Video Demonstration.

The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this Button. Your support is greatly appreciated. 

My Sponsors:

Support the businesses who support our community.

Shop Bear Woods for your craft supply needs.

Home of Pegas scroll saw blades.

Visit Heritage Wood Specialties

for you scroll saw ready boards.