Steve, Just a note of thanks. I have been working on Corel and the word art. I watched your video several times and took notes and have been having a ball doing new stuff. I also cut a few of your patterns this week end for my office desk. Thank you.
Your welcome Geno. Thanks for contributing your work to my site.
Don"t miss a single FREE scroll saw pattern. Sign up now!
Wooden Vases on the Scroll Saw Book
PayPal and Credit Card Payment Instructions.
All the additional content is below the daily content. Scroll down to find free software, Scrollers T-Shirts, My Pattern DVD Archive, Jigsaw Puzzle patterns and more.
Sunday, August 5, 2007
Posted by Steve Good at 7:35 PM
I ordered several of these clocks a while back so I thought I should make some clock patterns. They make nice gifts and it gives me a chance to make some more patterns.The clock stands 9" tall and 6 1/2" wide at the base. The front trim is 1/4" maple and the body and base are walnut.
The clock is a 3 1/2" insert that requires a 3 1/4" hole. I used a hole cutter for the insert.
This is an easy pattern to cut. The only challenge might be the words. Use a small blade. I had a selection of jewelers blades that I use to make jigsaw puzzles. I used the #4 jewelers blade for the words.
You can purchase the clock insert form the Clock Parts banner below.
Posted by Steve Good at 6:15 PM
Stephen, a reader from Australia watched the Heart Box video demonstration here at the Scrollsaw Workshop. He fired up Corel Draw and made his lady a nice box pattern.
I think he did a great job. Stephen was nice enough to send the pattern to share with everyone.
Just change the initials and make your own sweetheart box.
Thanks Stephen and keep making those patterns.
Posted by Steve Good at 1:30 PM
The dimensions of the clock are 10 inches long and 5 inches tall.
Here is a mantel clock that is simple to cut. I used 1 inch thick walnut for the body of the clock. I laminated 1/4 inch maple to the back. You want to use the same contrasting wood for the front and back to give it visual balance.
Apply the pattern to the body of the clock and use a hole saw to cut the 3 1/4 inch hole. Then glue the back contrasting wood so the hole is not visible from the back.
After the glue is set cut the pattern at the scroll saw.
After you get the scrolled front fretwork cut insert the clock and glue the fretwork around the clock. This makes sure it is aligned well.
The pattern has an optional crown. I did not choose to cut the crown because my wife did not like it. The crown adds another inch to the height of the clock. Your choice to include it or not.
Hope you have fun with this pattern.
Posted by Steve Good at 2:02 AM
CATALOG DVD $20+ Shipping
This DVD contains all the patterns from the Scrollsaw Workshop blog from May 12, 2007 to December 2, 2012. There are 1113 pattern books many with multiple patterns. These are the patterns that are available in the free online catalog. This DVD is for those who wish to have all the patterns and don't wish to try and download hundreds of patterns. Use the DVD for club meetings, sharing with friends and customers, Archiving etc.
No returns are accepted. No refunds. Defective DVDs will be replaced. Please watch the instruction videos to understand what you will receive.
PC Instructions Video:
Create a Family Heirloom. Download The Jigsaw Puzzle Template Book. Only $7.00
You will be directed to the download page after your purchase for instant download.This pattern book contains the following size patterns
5x5 25 piece
4x6 24 piece
5x7 35 piece
8x10 80 piece
4x6 96 piece
5x7 140 piece
8x10 320 piece
Scroll Saw Keychain Pattern Maker
Download the Oval Keychain Pattern Maker.
Philip Lowndes Noah's Arc Pattern Available. Watch the video below.
Flying Dutchman. The blades recommended by Steve Good
Help support The Scrollsaw Workshop with a small donation
*You do not need a paypal account to donate.
*I do not see your credit card information.
*Your email address will not be sold or given away.
*You can donate any amount.
Email me for my snail mail address if you are not comfortable donating online.
If you have trouble viewing the videos follow the links below for help.
The Scrollsaw Workshop Blog is in no way affiliated with or sponsored by Scroll Saw Woodworking and Crafts Magazine formerly (Scroll Saw Workshop Magazine) or it's publisher Fox Chapel Publishing.
Scroll Saw Woodworking and Crafts