Monday, November 19, 2018

Beautiful Wooden Rings with Stainless Steel Inserts. No pattern needed.

We are going to make these beautiful wooden rings with our scroll saw. There is no pattern needed for this project. The PDF download below gives complete instructions. I won't give all the details here in the post. Download the PDF if you need detailed instructions.

This project is not too difficult. The cutting needs to be close but we will sand the wood sleeve to fit the stainless steel insert. If you make a mistake just throw out the wood part and cut it again until you get it perfect.

I completed this ring in under an hour and a half.  If you get good at these there is room for profit. The inserts are cheap and there is not much labor involved. You use such a small amount of wood
that you can use highly figured exotics and still not be out much money.

We are going to use stainless steel ring inserts from this link. I purchased two size 10's and two size 11's and the cost was only $23 including shipping. They have many sizes available in different widths. The inserts are extremely comfortable. The name of the company is Craft Supplies USA. I don't know if they ship internationally. You will have to ask if you are out of the country.

I have no affiliation with this company. I purchased the rings and they arrived in just a few days. The order process was easy. 
 Make the pattern on the fly.
Tape it down to trace the circumference. 
 Now we have our pattern.
Find a highly figured exotic wood that is slightly thicker than the insert you chose. 
 Cut inside the pattern line. We will sand it to fit.
At this point, the ring should not fit. 
 I used a spindle sander but use what you have.
Test the fit. Test the fit. Test the fit. Did I say test the fit? Do not over sand. The ring needs to fit smoothly but not so snug that the wood ring breaks. When we glue the wood to the steel insert we can make up for slight overcuts but not much. Start over if you make a mistake. You might want to start out cutting two or three for back-ups.
 Now we will rough cut the exterior. This does not have to be perfect. We will sand it perfect.
Shoot for 2-3mm.
 Rough up the exterior of the steel insert with sandpaper so the glue will have something to hold on to. Use CA glue and activator to glue the insert into the wood ring.
 It looks a little rough at this point. We will fix that now.
Sand it round. Perfectly round. Use higher grits and sand the edges smooth by hand. Slightly round over the edges. Sand the wood to the same width of the insert. It's still not to late to start over. Just break off the wood and make another one if you need to. 
CA glue makes a surprisingly nice finish. I usually use thin CA glue for a gloss finish but all I had was medium. Apply a thin coat with paper towel and hit it with the activator. Instand gloss finish.

Here are the CA glue and Activator I use. 

 Amazon Link for CA Medium

Simply Wooden Creations Scroll Saw Artist Challenge Entries:

The deadline has passed for entries to the Simply Wooden Creations Scroll Saw Challenge. Here are the videos of all the entries. I believe he had over 30 entries. That's a pretty good turnout. Thanks to all who entered. Thanks to Russ for putting on the contest.

If Russ has a show before the Thanksgiving holiday he will announce the winners then. If there is not show for before the holiday he will announce the winner the following week. 

Bear Woods Sponsored Giveaway:

Entries are going strong for the Bear Woods Giveaway. We have over 5,100 entries with 11 days left to enter. If you have not entered yet them click the link below and maybe you will be the winner.
Remember that you can enter every day.

The 1st Winner will receive a $100 Bear Woods gift certificate.
The 2nd winner will receive a completed Charles Dearing artwork.

$12 per sheet of 12 coins plus $3.50 shipping
Inlay with a 1" Forstner Bit.
The perfect way to sign your work.

- -

Email Newsletter Readers: Remember that the Newsletter is just a copy of the daily blog post. To see the post in it's proper formatting click this link. If you ever misplace a pattern or any item you see here you can always find it on the blog. Everything stays on the blog forever. 

Products for your consideration:

Scroll Saw Pattern Design Tutorial: DVD
Let me teach you to create a beautiful wooden portrait pattern. I will show you everything you need from start to finish. The video will show you the free software program you can download for Windows or Mac OS. I will show you how to install the program and configure it for best results. 
Then I will show you the technique to take your photograph and make a pattern from it. When the pattern is complete we will go in the shop and cut it.
The DVD is $10 plus shipping. This is a data DVD that you will use on your computer to watch the video tutorial  

Every Scrollsaw Workshop Pattern from 2007-2017 in DVD
Purchase the entire Scrollsaw Workshop pattern catalog for offline access.

This DVD has 2,300 patterns published from 2007 thru 2017.
The DVD is $20 plus shipping. Ships to 60 countries around the world.

If you use the DVD on a Windows PC there is a simple viewer program to browse through the patterns.

The DVD also works fine on a MAC. The viewer program is not MAC compatible but there is an included PDF with all the patterns shown as thumbnails for easy viewing. 

Unique Wooden Vases:
Want to create beautiful wooden vases on the scroll saw?
My two "Wooden Vases on the Scroll Saw" books make it easy.

The books are $12 each and available for instant download after purchase. Click for Video Demonstration.

The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this Button. Your support is greatly appreciated.

My Sponsors:
Support the businesses who support our community.
Home of Pegas scroll saw blades.

This is the end of the daily posts. Keep scrolling for lot's more scrolls saw fun!
Bear Woods has been around since 1987 serving our hobby. They offer a wide range of craft products including Pegas scroll saw blades, clock inserts, toy parts, workshop supplies and much more. In my ten years of writing the Scrollsaw Workshop blog I have never received a complaint about Bear Woods. I get thousands of email a month so that's saying something about their customer service and quality products. Please support the people who support our hobby. Click now and visit Bear Woods.

Heritage Wood Specialties. Scroll saw ready boards!

Heritage Wood Specialties is a nationally recognized supplier of superior quality hardwoods to fine woodworkers across the US and Canada. Novice hobbyists and experienced enthusiasts alike can enjoy the high quality woodworking materials and kits available from Heritage Wood Specialties. Great source for scroll saw ready boards.

Seyco began business in 1986 with the goal to supply the best customer support and quality products in the scroll saw industry. I have worked with Seyco on many occasions and I can tell you they are simply the best. Please do yourself a favor and click the image above. Steve Good

Free Pattern Catalog. 1000's of free patterns.

Thousands of FREE scroll saw patterns. No registration or signup required.

The projects form these patterns can be sold without restrictions. The patterns cannot be sold.

Click here for the Free Online Catalog.


Wooden Vases on the Scroll Saw Book $12 Each
Each digital book is available for download immediately after payment.
The books are $12 per edition and contains eight unique patterns each.
Watch the following video to see how easy these beautiful scroll saw vases
are to make. 

Order the $3 pdf Catalog

This is a PDF of all the patterns in my free catalog. It is for Windows only and has a program to automatically download the pattern to your computer. Please watch the video below before you order. Click the picture to order.
You do not need a PayPal account to order. At the bottom of the PayPal page is a button that will allow you to pay with a credit card. After successful payment click the Return to Merchant button for the download.

Stencil Printer 1.7

Stencil Printer Instruction Video.

The Scrollsaw Workshop Stencil Printer 1.7 is my latest software for creating patterns. It will create key chain fobs, desk name plates and more. Click the image above to download the latest version. It is free to use donationware. This software is for Windows PC only.

Scroll Saw Pattern Printer update 1.1

Scroll Saw Pattern Printer update 1.1
Download the Free Scroll Saw Pattern Printer Version 1.1. Create name patterns in seconds. Windows PC only.
Download Version 1.1
Please consider a $5 donation for The Scroll Saw Pattern Printer v1.1.

Scroll Saw Keychain Pattern Maker

Use the Scroll Saw Keychain Maker to start a small keychain business. Build yourself a nice display and make up severl keychains with common names. Sell at craft shows, on Ebay or at work. Everyone needs a keychain. Take custom orders. Heck just make them and give them away as gifts. It's all made easy with the Scroll Saw Keychain Maker. Watch the video demonstration then download the file below and get started with the fun.
The following link will start the download process. After the file download is complete just click the setup file and the program will be installed. Please consider a $5 donation for the program.

Download the Oval Keychain Pattern Maker.

Enjoy designing and printing these great personalized key chains. Give them as gifts, make them for fun or sell them at craft shows. It's easy, just watch the video demo then download and install the program. You will be designing these fun projects in minutes. Windows PC only.
Download the Free Oval Key Chain Pattern Maker. Create Oval key chain patterns in seconds.
Download Version .9a
Please consider a $5 donation for The Oval Key Chain Pattern Maker.

T-Shirts and More.

T-Shirts and More.
Show your love for the hobby and support the Scrollsaw Workshop. Safe and secure order fullfilled by CafePress. Take a look. You are sure to find something you like. CLICK THE IMAGE to visit the store.

The Lifter

Papa's Custom Patterns.

Philip Lowndes Noah's Arc Pattern Available. Watch the video below.

This video is from Philip Lowndes. He is the designer of this beautiful Noah's Arc puzzle pattern. If you would like the pattern follow the link below.
Buy This Wonderful Heirloom Puzzle Pattern

Think Safety

Remember to keep the safety of yourself and others in your work shop in your thoughts at all times. Always wear eye and ear protection. Follow all the manufactures warnings that came with your power tools. If I demonstrate something on this web site that you don't feel is safe, don't do it. Your safety is your responsibility. Fingers are handy things, try to keep all of them.
The Scrollsaw Workshop Blog is in no way affiliated with or sponsored by Scroll Saw Woodworking and Crafts Magazine formerly (Scroll Saw Workshop Magazine) or it's publisher Fox Chapel Publishing.

Scroll Saw Woodworking and Crafts