This serving tray calls for 3/4" thick wood but could also be cut from 1/2" thick wood for a lighter tray.
The tray is 14" long and 10" wide.
Important Note: I designed this tray using a relief cut. The center of the tray is cut at a very small angle
by tilting the scroll saw table. This allows the center of the tray to recess but only about 50%, to form the holding area. Instructions are in the pattern.
When you drill the interior hole for the relief cut, you want to use a 1/6" drill bit or smaller. This makes the interior hole easier to conceal.
As an alternative to the relief cut you can simply leave the top flat and add a dish to hold the snacks.
Russ Claridy from Simply Wooden Creations 3D prints my Stickman Surfer.
Russ has been a good friend for many years. He has spent hundreds of hours helping the scroll saw community through his YouTube channel and other endeavors. He was even a moderator on my Community forum for a few years before he got so busy with other work.
Russ called me today and wanted to show me his video where he takes one of my patterns and prints it on one of his 3D printers. It turned out great and I wanted to show you because he uses a different software than I used when I demonstrated this in the past.
Russ uses TinkerCad to make the 3D model from my 2D pattern. I used Blender. Blender is much more difficult so TinkerCad is probably the better option for this job.
This is not a tutorial but I can put together a tutorial if there is enough interest. Maybe I can talk Russ into making a tutorial. TinkerCad is free online software for creating 3D print models.
Thanks, Russ.
If you do not own a 3D printer and are interested in the technology then see my affiliate link at the bottom of this post. The Sovol SV01 Pro is a good entry-level printer. If you do an Amazon search for 3D printers you will find options from under $200 and up. If you want an idea of what you can do with a 3D printer check out this link. Thingiverse. The site has thousands of downloadable files of things you can 3D print. The models range the gamut from useful to outright silly.
$12 per sheet of 12 coins plus $3.50 shipping
Inlay with a 1" Forstner Bit.
The perfect way to sign your work.
Email Newsletter Readers: Remember that the Newsletter is just a copy of the daily blog post. To see the post in its proper formatting click this link. If you ever misplace a pattern or any item you see here you can always find it on the blog. Everything stays on the blog forever.
Over 3,900 Digital Pattern Books. Many with multiple patterns.
Every Scrollsaw Workshop Pattern from 2007-2022 on USB drive, or Instant Download. Over 3,900 Patterns!
Purchase the entire Scrollsaw Workshop pattern catalog for offline access.You will never run out of fun patterns to cut.
Two delivery options.
After payment, you will receive an email with the download link. This is a large file. You should not attempt to download it on a tablet or smartphone. It is a compressed file that will need to be extracted to your hard drive. Basic computer skills are necessary to extract the file.
The USB drive will be shipped to the US only by first-class mail. Shipping time varies but you will get a tracking number. I normally ship within three days. USPS shipping normally varies from three days to a week.
Want to create beautiful wooden vases on the scroll saw?
My two "Wooden Vases on the Scroll Saw" books make it easy.
The books are $12 each and available for instant download after purchase. Click for Video Demonstration.
My Sponsors:
Support the businesses that support our community.
Home of Pegas scroll saw blades.
Make sure you check out the Seyco Scrollers Drill
Sovol SV01 Pro 3D Printer with Metal Direct Drive Extruder CR-Touch Silent Board Dual Z-axis 4.3 inch Handheld Color Touch Screen Flexible Magnetic Plate, Larger Build Volume 280x240x300mm
I own this 3D printer and have had good success with it. It is a good entry-level 3D printer.
