Angle Cut Plate Scroll Saw Pattern.

I used 1/2" Thick maple for this plate. You might call it a basket or a bowl. How ever you use it they are easy to make. The hardest part gluing the rings together without having glue squeeze out spots. Go very lite on the glue and wash squeeze out with a damp cloth immediately.  

The rings are cut with the table tilted. Depending on the thickness of the wood and the size of the blade your angle will be different. Do a series of test cuts in the same wood to determine the best angle. You want the pieces to fall out a little over half the thickness of the wood. 

Cut all the rings keeping all the parts in the original position.They may not fit if you end for end a ring. 

Apply small spots of glue while you extend each ring. Don't use more glue than is absolutely necessary. Just a few spots will do. Wipe up the squeeze out with a damp cloth. 

_______________

Yesterday's Pattern:

Yesterday I published a spiral basket pattern. I mentioned that I though it was a failed attempt. I wanted the pattern to show a spiral effect when assembled. I had a few emails telling me their thoughts on  why it failed. As it turned out I think I just assembled it wrong. I have not cut the pattern again but I simulated the assembly in my computer. Using the same pattern pieces I rotated each ring 5 degrees counter clockwise and got the result above. That's what I wanted. I just rotated the pieces too much. 

_______________

Click to Order

- -

Email Newsletter Readers: Remember that the Newsletter is just a copy of the daily blog post. To see the post in it's proper formatting click this link. If you ever misplace a pattern or any item you see here you can always find it on the blog. Everything stays on the blog forever. 

www.scrollsawworkshop.blogspot.com

Please support our monthly giveaway sponsor. Bear Woods,
your source for Pegas scroll saw blades and craft supplies.
_______________

Do you need a source for scroll saw ready boards?
Look no more because Heritage Wood Specialties is
the source you have been looking for.

Let me teach you to create a beautiful wooden portrait pattern. I will show you everything you need from start to finish. The video will show you the free software program you can download for Windows or Mac OS. I will show you how to install the program and configure it for best results. 

Then I will show you the technique to take your photograph and make a pattern from it. When the pattern is complete we will go in the shop and cut it.

The DVD is $10 plus shipping. This is a data DVD that you will use on your computer to watch the video tutorial  

Purchase the entire Scrollsaw Workshop pattern catalog for offline access.

This DVD has 1,964 patterns published from 2007 thru 2016.
The DVD is $20 plus shipping. Ships to 60 countries around the world.

You can view a video showing use of the DVD on a Windows PC and a MAC at this link

Click here to Order. 

Want to create beautiful wooden vases on the scroll saw?

My two "Wooden Vases on the Scroll Saw" books make it easy.

The books are $12 each and available for instant download after purchase. Click for Video Demonstration.

The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this Button. Your support is greatly appreciated. 

Ad: Affiliate

Scroll Saw Woodworking & Crafts Subscription

The leading resource for scroll sawyers.

• The first print issue should arrive in 12-16 weeks. Details
• Control your subscription settings anytime using Amazon's Magazine Subscription Manager.
• If you purchase the auto-renewing offer, your subscription will renew at the end of the current term. Before it renews, we will send you a reminder notice stating the term and rate then in effect. Cancel anytime.