Home Clock Scroll Saw Pattern.

This Home clock is 12.5" long and 4" tall. 

You will need a clock movement for a 1/2" thick dial. Clock Movement Link

You will need a set of 1.5" clock hands. Clock Hand Link

Note that the hands are black on the front. I liked the back white side better so I put them on backward. Hopefully, this won't make the clock run in reverse. 

Remember that clock hands can often be cut down in length. If you have a set already check to see if they look okay shortened.

Harbor Freight Magnifying Lamp:

Harbor Freight Link

This is not an affiliate link.

Many scrollers find it useful to have a magnifying glass to help follow the pattern line. It is also very important to have good light. These magnifying lamps can get pretty expensive. 

A couple of years ago I started looking for a decent Magnifying lamp. I bought four different lamps from Amazon. I had no luck with any of them and they were all close to or over $100. They either had a terrible lens of poor light. One had weak springs and would not stay in the position it was set.

The best magnifying lamp I have used is the one sold by Seyco. Link here. It has minimal distortion and great light. If it is in your budget then you won't go wrong buying this light.  $109.95

If you need to go a little easier on the wallet then I can recommend the magnifying lamp sold at Harbor Freight. Now don't get me wrong. For $39.99 you will not get a distortion-free lens or LED light. You will get an acceptable fluorescent lamp that is bright enough. You will get a 5" lens that is clear in the center with slight distortion on the edges. It has 1.75 magnification which I find strong enough for most cuts. I use it when I am cutting coins which is pretty small cutting. You may need more magnification.

The build quality of the Harbor Freight Magnifying lamp is pretty good considering the price. I have used one for a few years and it has held up well. It stays where you put it. I have not had to replace the fluorescent lamp yet. The quality is actually better than any of the lamps I bought on Amazon. 

One problem with the Harbor Freight lamp is that the lens cover will not stay open without help. You can either remove it or keep it open with a rubber band. 

In my opinion, for $39.99 this Harbor Freight magnifying lamp is a good buy. If you need a mag lamp and have a local Harbor Freight store you might want to give it a try. If it does not suit your eyeball then you can take it back and sprint for the better quality Seyco lamp.

Click to Order

$12 per sheet of 12 coins plus $3.50 shipping

Inlay with a 1" Forstner Bit.

The perfect way to sign your work.

Video Demonstration Link

- -

Email Newsletter Readers: Remember that the Newsletter is just a copy of the daily blog post. To see the post in it's proper formatting click this link. If you ever misplace a pattern or any item you see here you can always find it on the blog. Everything stays on the blog forever. 

www.scrollsawworkshop.blogspot.com

Products for your consideration:

Every Scrollsaw Workshop Pattern from 2007-2018 in DVD

Purchase the entire Scrollsaw Workshop pattern catalog for offline access.

This DVD has over 2,600 patterns published from 2007 thru 2018.
The DVD is $20 plus shipping. Ships to 60 countries around the world.

Click here to Order. 

If you use the DVD on a Windows PC there is a simple viewer program to browse through the patterns.

The DVD also works fine on a MAC. The viewer program is not MAC compatible but there is an included PDF with all the patterns shown as thumbnails for easy viewing.

Now Available on USB Thumb Drive

Don't have a DVD drive on your new computer. No problem. Buy the catalog on a USB thumb drive.
All the same file but on an easy to use a thumb drive. The USB thumb drive option is $23 plus shipping.

Buy Now. 

Scroll Saw Pattern Design Tutorial: DVD
Let me teach you to create a beautiful wooden portrait pattern. I will show you everything you need from start to finish. The video will show you the free software program you can download for Windows or Mac OS. I will show you how to install the program and configure it for best results. 

Then I will show you the technique to take your photograph and make a pattern from it. When the pattern is complete we will go in the shop and cut it.

The DVD is $10 plus shipping. This is a data DVD that you will use on your computer to watch the video tutorial  

Unique Wooden Vases:
Want to create beautiful wooden vases on the scroll saw?

My two "Wooden Vases on the Scroll Saw" books make it easy.

The books are $12 each and available for instant download after purchase. Click for Video Demonstration.

The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this Button. Your support is greatly appreciated. 

My Sponsors:

Support the businesses who support our community.

Shop Bear Woods for your craft supply needs.

Home of Pegas scroll saw blades.

Visit Heritage Wood Specialties

for you scroll saw ready boards.

Ad: Affiliate

Nut & Bolt Thread Checker (Inch & Metric)

• Each size has a nut and bolt checker on the same gauge. 26 male/female gauges - 14 inch & 12 metric.
• Thread sizes are permanently stamped onto each gauge (inch in red, metric in white)
• Inch gauges are clear zinc plated, metric gauges are black oxide.
• The individual gauges rotate freely on the wire cable for fast thread verification
• Wire cable with loop for convenient hanging