Eagle Welcome Sign Scroll Saw Pattern.

Just a simple rustic welcome sign. The sign is about twelve inches wide. In the simulated picture, I am showing the backer board painted red. This is just to make the wood texture show up better in the picture. You can paint it or leave it natural. 

Brad Point Drill Bit Set:

Buy on Amazon

As woodworkers, we need to drill holes. As scroll sawyers, we often need those holes in an exact position. An example is a wooden wheel. The hole needs to be centered.  The best tools to make that happen are an awl and brad point drill bits. Brad point bits are just what they sound like. They have a small brad on the tip to guide the bit when starting the hole.

You will notice that I try to remember to add a center dot to my patterns when they need an accurate hole drilled. The wheel above is 1" diameter and needs a 1/4" diameter hole drilled for the axle.

Take your awl(Amazon Link), and carefully punch a small dent at the center dot. Don't go tto deep. You just need a dent for the brad point to hit.

You want the dent to be accurate but you can cheat the hole at the drill press a little.

I always use a backer board when drilling holes. You will see after I drill the hole that the back side is clean and free of splintering. That is what the backer board does for you.

Before you start the drill move the brad point into the dent you made with the awl. You should be able to see if you are well centered. The edge if the bit should line up with the line.

If it's not perfect you can bias the bit just slightly in the direction of the correction. You can't make up for a big error but small corrections are possible.

After the drilling is complete the pattern line should be gone. Perfectly center axle hole.

When you flip the board over you should have little to no splintering. If you do see some splintering then your probably pushed too hard on the drill bit. You want to slow down just before the drill exits the back of the wood for the cleanest cut.

Important Note:

A high-quality set of brad point bits can get very expensive. The set I linked to above is a set I have owned and they are just adequate. I don't push the bits too hard so they have lasted for a few years. I have replaced two or three of the bits that have broken. It is a decnt starter set.

Click to Order

$12 per sheet of 12 coins plus $3.50 shipping

Inlay with a 1" Forstner Bit.

The perfect way to sign your work.

Video Demonstration Link

- -

Email Newsletter Readers: Remember that the Newsletter is just a copy of the daily blog post. To see the post in it's proper formatting click this link. If you ever misplace a pattern or any item you see here you can always find it on the blog. Everything stays on the blog forever. 

www.scrollsawworkshop.blogspot.com

Products for your consideration:

Every Scrollsaw Workshop Pattern from 2007-2018 in DVD

Purchase the entire Scrollsaw Workshop pattern catalog for offline access.

This DVD has over 2,600 patterns published from 2007 thru 2018.
The DVD is $20 plus shipping. Ships to 60 countries around the world.

Click here to Order. 

If you use the DVD on a Windows PC there is a simple viewer program to browse through the patterns.

The DVD also works fine on a MAC. The viewer program is not MAC compatible but there is an included PDF with all the patterns shown as thumbnails for easy viewing.

Now Available on USB Thumb Drive

Don't have a DVD drive on your new computer. No problem. Buy the catalog on a USB thumb drive.
All the same file but on an easy to use a thumb drive. The USB thumb drive option is $23 plus shipping.

Buy Now. 

Scroll Saw Pattern Design Tutorial: DVD
Let me teach you to create a beautiful wooden portrait pattern. I will show you everything you need from start to finish. The video will show you the free software program you can download for Windows or Mac OS. I will show you how to install the program and configure it for best results. 

Then I will show you the technique to take your photograph and make a pattern from it. When the pattern is complete we will go in the shop and cut it.

The DVD is $10 plus shipping. This is a data DVD that you will use on your computer to watch the video tutorial  

Unique Wooden Vases:
Want to create beautiful wooden vases on the scroll saw?

My two "Wooden Vases on the Scroll Saw" books make it easy.

The books are $12 each and available for instant download after purchase. Click for Video Demonstration.

The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this Button. Your support is greatly appreciated. 

My Sponsors:

Support the businesses who support our community.

Shop Bear Woods for your craft supply needs.

Home of Pegas scroll saw blades.

Visit Heritage Wood Specialties

for you scroll saw ready boards.