M&M's Candy Dispenser Scroll Saw Pattern.

This M&M's candy dispenser is easy to make. I cut it from 1/2" and 1/4" thick Baltic birch plywood. The center section is 1" thick so it is a glue-up of two 1/2" sheets. As designed it dispenses about 13 M&M pieces. Just enough to satisfy your sweet tooth.

There are two critical steps in building this dispenser. The center dial needs to be sanded for easy movement. This means you need to sand about 1/16" off the thickness. Sand the diameter so it turns smoothly. Test and re-test before glue-up.

The second critical step is lining up the dial dowel rod as you glue and screw the pieces together. Constantly check for smooth rotation before you drill for the front holes. Be accurate.

I did slightly modify the pattern after I made this prototype. I made the tray larger and opened up the hole in the acrylic front higher. This just makes it easier to get the candy out of the tray.

Buy on Amazon

M&M's Milk Chocolate Candies 3Lb 14oz Jar

Scroll Saw Upper Arm Adjustment:

Click Image to enlarge.

I have had this question come up a few times lately. I thought I would point out an adjustment. This adjustment pertains to the Excalibur class of scroll saws. This includes the Excalibur, Seyco, Pegas, Jet, King and a couple others.

When you move the upper arm up it should move easily and stay up when released. Some people will find that from the factory the upper arm is difficult to raise. That is more common than the arm not staying up.

There is a simple adjustment to set the friction just right for easy movement and still say up. On the back left side of all of these saws are a locking nut and slotted bolt. Use a wrench to slightly loosen the nut. Use a flat blade screwdriver to turn the bolt. Counter-clockwise will loosen the arm. 

Turn the bolt just a fraction at a time. It does not take much to change the friction. Once it feels just right, lock the nut back down. 

I have seen this adjustment change after several hours of saw use. Just adjust as needed. 

Click Image to enlarge. 

Click to Order

$12 per sheet of 12 coins plus $3.50 shipping

Inlay with a 1" Forstner Bit.

The perfect way to sign your work.

Video Demonstration Link

- -

Email Newsletter Readers: Remember that the Newsletter is just a copy of the daily blog post. To see the post in it's proper formatting click this link. If you ever misplace a pattern or any item you see here you can always find it on the blog. Everything stays on the blog forever. 

www.scrollsawworkshop.blogspot.com

Products for your consideration:

Every Scrollsaw Workshop Pattern from 2007-2018 in DVD

Purchase the entire Scrollsaw Workshop pattern catalog for offline access.

This DVD has over 2,600 patterns published from 2007 thru 2018.
The DVD is $20 plus shipping. Ships to 60 countries around the world.

Click here to Order. 

If you use the DVD on a Windows PC there is a simple viewer program to browse through the patterns.

The DVD also works fine on a MAC. The viewer program is not MAC compatible but there is an included PDF with all the patterns shown as thumbnails for easy viewing.

Now Available on USB Thumb Drive

Don't have a DVD drive on your new computer. No problem. Buy the catalog on a USB thumb drive.
All the same file but on an easy to use a thumb drive. The USB thumb drive option is $23 plus shipping.

Buy Now. 

Scroll Saw Pattern Design Tutorial: DVD
Let me teach you to create a beautiful wooden portrait pattern. I will show you everything you need from start to finish. The video will show you the free software program you can download for Windows or Mac OS. I will show you how to install the program and configure it for best results. 

Then I will show you the technique to take your photograph and make a pattern from it. When the pattern is complete we will go in the shop and cut it.

The DVD is $10 plus shipping. This is a data DVD that you will use on your computer to watch the video tutorial  

Unique Wooden Vases:
Want to create beautiful wooden vases on the scroll saw?

My two "Wooden Vases on the Scroll Saw" books make it easy.

The books are $12 each and available for instant download after purchase. Click for Video Demonstration.

The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this Button. Your support is greatly appreciated. 

My Sponsors:

Support the businesses who support our community.

Shop Bear Woods for your craft supply needs.

Home of Pegas scroll saw blades.

Visit Heritage Wood Specialties

for you scroll saw ready boards.