For these six ornaments, I am using 1/8" acrylic mirror and Baltic birch plywood. In the ornament above The frame is 1/4" thick and the mirror and fretwork ornaments are both 1/8" thick. I cut as accurately as possible to get a good fit in the frame. If you have trouble staying accurate then over cut and sand to a good fit. The second option to cut the mirror ornaments below is easier and I like them better.
When these are hung on the tree with all the lights they reall stand out.
Okay now, let's talk about the second option below for the ornaments. You can also cut the interior cuts out of the mirror and back it with painted 1/8" Baltic birch plywood.
I actually like this second option better but obviously, I was not smart enough to apply the pattern to the correct side of the stack.
Amazon link to buy the acrylic mirrorOOPS! I see a problem ahead. :)
To cut the acrylic mirror you need to stack it between two sheets of 1/8" Baltic birch plywood. The ply protects the mirror. In the stack below I have the mirror facing down which was why I had the backward NOEL. When I wrapped the stack with blue painters tape to hold it together I lost which side was the top. If I had picked one of the ornaments without letter I would have been okay. Just pay more attention than I did. :)
Experimenting with the Acrylic mirror:
In the past, I have always used the sandwich cut technique to cut acrylic and metal. I use a different brand of blades now and this acrylic mirror is something I have only ordered a few times. I decided to try to cut it with only its protective film and the pattern.
It cuts nearly perfectly. I had to use good technique because the acrylic is so thin but the edges are clean and I was able to cut accurately. I would still probably stack cut and wrap in blue painters tape to make it easier but I am not sure I need the sacrificial BB ply to cut this stuff.
I used a Pegas #3 Modified geometry blade for the cut. You may get slightly different results depending on the blade yo use. Just experiment and see what works.
Fox Chapel Publishing Super Giveaway:
Don't miss this giveaway! I received this in my email today from Fox Chapel Publishing. They are giving away a new Pegas 21" scroll saw and four of their great pattern books. This is a $934.96 value.
Click the link above to go to their contest page. I did notice that their link to the full contest rules is currently broken. They show the basic rules but you may need to contact them for the full rules until they get it corrected. No purchase is necessary to enter.
Fox Chapel Publishing is a well-respected publishing company that can be trusted with your information. They are only asking for Name and email. They are the publisher of Scroll Saw Woodworking and Crafts Magazine. If you have never had the opportunity to check out this magazine then take a look. Lots of great stuff there.
The contest deadline ends on December 31. This would make a wonderful new year's gift.
Personalized Christmas Ornament Patterns:
I am still making good progress on ornament patterns. I should be able to get caught up today. If you have orders in the queue, keep your eye on your email inbox.
The price is $1 per name with a 5 name minimum. I keep the price as low as possible
because I want everyone to have a chance to make these ornaments for family and friends.
You only pay after you have received the order and are
100% satisfied with the patterns. Invoice included with
the pattern email. Pay by credit card(secure Paypal), check, or cash.
The patterns will be emailed to you after they are completed.
Please allow up to a week for delivery.
You can use last names on the ornaments if you like but remember that the more letters the more
difficult they are to cut. Ten letters and up gets pretty small. If you need to you can enlarge the patterns by 10% to make the interior cuts larger. No special characters are supported. I can get a hyphen in there but it looks odd. It has to connect the two letters so it does not just fall out.
$12 per sheet of 12 coins plus $3.50 shipping
Inlay with a 1" Forstner Bit.
The perfect way to sign your work.
Email Newsletter Readers: Remember that the Newsletter is just a copy of the daily blog post. To see the post in it's proper formatting click this link. If you ever misplace a pattern or any item you see here you can always find it on the blog. Everything stays on the blog forever.
Products for your consideration:
Every Scrollsaw Workshop Pattern from 2007-2018 in DVD
This DVD has over 2,600 patterns published from 2007 thru 2018.
The DVD is $20 plus shipping. Ships to 60 countries around the world.
The DVD is $20 plus shipping. Ships to 60 countries around the world.
If you use the DVD on a Windows PC there is a simple viewer program to browse through the patterns.
The DVD also works fine on a MAC. The viewer program is not MAC compatible but there is an included PDF with all the patterns shown as thumbnails for easy viewing.
All the same file but in an easy to use a thumb drive. The USB thumb drive option is $23 plus shipping.
Now Available on USB Thumb Drive
Don't have a DVD drive on your new computer. No problem. Buy the catalog on a USB thumb drive.All the same file but in an easy to use a thumb drive. The USB thumb drive option is $23 plus shipping.
Want to create beautiful wooden vases on the scroll saw?
My two "Wooden Vases on the Scroll Saw" books make it easy.
The books are $12 each and available for instant download after purchase. Click for Video Demonstration.
My Sponsors:
Support the businesses who support our community.
Home of Pegas scroll saw blades.
Ad Affiliate
Chef'sChoice 609A000 Electric Meat Slicer with Stainless Steel Blade Features Slice Thickness Control and Tilted Food Carriage Easy Clean, 7-Inch, Silver
Currently $92.99.
A video review on YouTube This not my video.
- Cast-aluminum and stainless steel slicer with gear-drive cool-running high-torque motor
- 7-inch multipurpose stainless steel blade slices from deli-thin to approximately 3/4-inch slices
- Tilted large-capacity food carriage and cantilever design provide fast efficient slicing
- Blade food carriage food pusher food Deflector and Thickness guide remove for easy cleaning safety fuse at the base of the slicer for power surges protection
- Recommended Blade Sharpener:Model 601
