Here is the first Easter pattern of the year. The bunny is a bit over seven inches tall. It can be cut from 3/4" thick wood. If you really want to jazz it up, use one of the LED strips on the base behind bunny and chick.
Buffalo Nickel Giveaway Ends:
The entries for the $100 Bear Woods gift certificate are complete. I will be compiling the images into a slide show and drawing the winner later today. I will announce the winner in the next post. We had around 70 entries so your chances are pretty good. Thanks to all who entered and good luck.
Answering Confusion about Spray Adhesive:
In the last post, I talked about the qualities of spray adhesive and glue sticks for applying scroll saw patterns. I made one statement that I did not make very clear and I received several emails about it.
I said that the way I prevent lifting with spray adhesive is to use blue painters tape under the pattern and not to let the glue set and tack before applying the pattern.
That statement goes against the instructions on the can and what most people will tell you to do. Let me explain.
Because I am using blue painters tape under the pattern, the pattern can be permanently stuck. We are not going to have to remove the pattern from the tape. They can be bonded completely and it won't matter. The problem is that to get the strongest bond possible you need to spray glue on both surfaces, allow the glue to tack for a couple minutes, then apply the pattern. That will be as permanent as possible but I don't want to spray the surface of the blue tape because it is very messy.
That leaves us with two choices. We can spray the back of the pattern and apply is instantly or we can spray the back of the pattern and wait for it to tack before we apply the pattern.
I have tested both choices several times over the years and I cannot tell any difference between letting the glue tack and not letting it tack when the pattern is applied to blue painters tape.
There is a huge difference if you apply the spray glue to both surfaces and let it tack but like I said I don't want to use that method because it is messy.
1. Spray adhesive on the back of the pattern and the pattern applied instantly.
2. Spray adhesive on the back of the pattern. Wait 3 minutes to tack then apply the pattern.
3. Spray adhesive on both the pattern and the tape. Wait 3 minutes to tack then apply the pattern.
When I try to remove the three pieces of paper after 20 minutes, number 3 is extremely difficult to remove. The paper almost tears. It is close to permanent.
Paper 1 and 2 show absolutely no difference when I try to remove them. This is not exactly the same as cutting fretwork but even there I see no difference.
Pattern lifting is the most problem when fretwork is very detailed. The paper just gets weak. Under just the right circumstances both 1 and 2 will lift sometimes. When this happens I just use my finger to help hold the pattern while I cut. My finger might be a couple millimeters from the blade.
My suspicion for there not being a difference is that I am applying the paper to the blue painter's tape. The results may be different depending on the surfaces that are being glued.
That is my explanation of the statement I made that was not clear.
Everyone has there own methods for how they work in the shop. I'm not trying to say that my way is the right way. My way is just my way based on my experiences. Use your experience and test to do what works for you.
$12 per sheet of 12 coins plus $3.50 shipping
Inlay with a 1" Forstner Bit.
The perfect way to sign your work.
Email Newsletter Readers: Remember that the Newsletter is just a copy of the daily blog post. To see the post in its proper formatting click this link. If you ever misplace a pattern or any item you see here you can always find it on the blog. Everything stays on the blog forever.
Products for your consideration:
Every Scrollsaw Workshop Pattern from 2007-2019 on DVD
This DVD has over 2,900 patterns published from 2007 thru 2019.
The DVD is $20 plus shipping. Ships to 60 countries around the world.
The DVD is $20 plus shipping. Ships to 60 countries around the world.
If you use the DVD on a Windows PC there is a simple viewer program to browse through the patterns.
The DVD also works fine on a MAC. The viewer program is not MAC compatible but there is an included PDF with all the patterns shown as thumbnails for easy viewing.
All the same file but in an easy to use thumb drive. The USB thumb drive option is $23 plus shipping.
Now Available on USB Thumb Drive
Don't have a DVD drive on your new computer. No problem. Buy the catalog on a USB thumb drive.All the same file but in an easy to use thumb drive. The USB thumb drive option is $23 plus shipping.
Want to create beautiful wooden vases on the scroll saw?
My two "Wooden Vases on the Scroll Saw" books make it easy.
The books are $12 each and available for instant download after purchase. Click for Video Demonstration.
My Sponsors:
Support the businesses that support our community.
Home of Pegas scroll saw blades.
Ad: Affiliate
Official Creality Ender 3 Pro 3D Printer with Glass Plate, Upgrade Cmagnet Build Surface Plate and UL Certified Meanwell Power Supply Build Volume 220x220x250mm
- Upgraded Version: It is an upgraded version of Ender 3, comes with extra glass plate, Cmagnet build surface, and also MeanWell power supply. The Ender 3 Pro boasts the same outstanding performance as the Ender 3, upgraded components make this 3D printer more stable, durable and easier to operate.
- MeanWell Power Supply: Equipped with UL certified MeanWell power supply, which is produced by the listed company with mature technology, and it meets all the needs of fast heating and long-time 3D printing.
- Cmagnet Build Surface Plate: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.
- Resume Printing Function: Shielded by its power supply from voltage spikes and power outages. If electrical power is lost, prints can be resumed from the last layer, saving time and reducing waste.
- What You Get: Ceality Ender 3 Pro 3D pinrter, Glass plate, lifetime technical assistance and 24 hours professional customer service.
