Deer Diorama Scroll Saw Pattern.

 Download Below

This country diorama is 10" wide. All the parts are cut from 1/4" thick wood. The background is four layers. All the parts are attached to the base with slot and tab for easy assembly. This 

Pegas Replacement Chuck Heads for the DeWalt and Delta Scroll Saws. Affiliate Link. This is an ad but also informative.

Purchase at Bear Woods.

If you own the DeWalt DW788 or the Delta 40-694 then you are very likely to see the problem I am about to talk about. I also want to tell you about a solution that many scrollers swear by.

It the photo above you are looking at the front of the top blade clamp of a DeWalt DW788 scroll saw. If you look very closely at the two set screws you will see that they do not meet flush. There is a small gap at the top. The only contact is at the bottom.

This condition will drive you crazy with slipping blades. 

Here is what causes this problem. When a scroll saw blade slips out of the clamp we tend to try to tighten the thumbscrew tighter. Sometimes we add an extra knob or dial to the thumbscrew to make it easier on our old hands. Both of these have the potential to bend the clamp so the thumbscrew and set screw no longer meet flush. 

This can be very tricky to troubleshoot if you don't know about the problem. The only good solution is to replace the clamps. 

As a side note, do not be tempted to overtighten the thumbscrew. You only need moderate force to keep the blade in place if the thumbscrew and set screw are not worn. If you use an extra lever or knob on the thumbscrew you have to be extra careful because you can exert torque on the thumbscrew.

Solution:

Like I said you need to replace the heads for both the upper and lower arms. You can order the stock heads to repair the problem but they will eventually bend again if you are not very careful

A better solution is to replace the heads with the Pegas Chuck Head kits. These kits will cost you a few more bucks but from my experience, they are much more difficult to bend. I intentionally tried to bend a set and could not do it with just my fingers. They are built pretty well.

This kit is worth the price just for the above problem. Pegas also says that the clamps are lighter. This reduction in weight will improve vibration and the wear of the bearing. You also ket new thumbscrews and set screws. These items wear out also so they need to be replaced from time to time. This just adds to the value.

Here is a link to a review and installation of this kit I did back in 2018. That will give you more details about this kit.

Click to Order

$12 per sheet of 12 coins plus $3.50 shipping

Inlay with a 1" Forstner Bit.

The perfect way to sign your work.

Video Demonstration Link

- -

Email Newsletter Readers: Remember that the Newsletter is just a copy of the daily blog post. To see the post in its proper formatting click this link. If you ever misplace a pattern or any item you see here you can always find it on the blog. Everything stays on the blog forever. 

www.scrollsawworkshop.blogspot.com

Products for your consideration:

Every Scrollsaw Workshop Pattern from 2007-2019 on DVD

Purchase the entire Scrollsaw Workshop pattern catalog for offline access.

This DVD has over 2,900 patterns published from 2007 thru 2019.
The DVD is $20 plus shipping. Ships to 60 countries around the world.

Click here to Order. 

If you use the DVD on a Windows PC there is a simple viewer program to browse through the patterns.

The DVD also works fine on a MAC. The viewer program is not MAC compatible but there is an included PDF with all the patterns shown as thumbnails for easy viewing.

Now Available on USB Thumb Drive

Don't have a DVD drive on your new computer. No problem. Buy the catalog on a USB thumb drive.
All the same file but in an easy to use thumb drive. The USB thumb drive option is $23 plus shipping.

Buy Now. 

Unique Wooden Vases:
Want to create beautiful wooden vases on the scroll saw?

My two "Wooden Vases on the Scroll Saw" books make it easy.

The books are $12 each and available for instant download after purchase. Click for Video Demonstration.

The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this Button. Your support is greatly appreciated. 

My Sponsors:

Support the businesses that support our community.

Shop Bear Woods for your craft supply needs.

Home of Pegas scroll saw blades.

Visit Heritage Wood Specialties

for you scroll saw ready boards.

My Amazon Affiliate Link.