Make sure you read the important note below.
The scroll saw is a versatile tool. I cut this entirely on the scroll saw. You don't have to use only the scroll saw but I just wanted you to know that you can and it will work fine. I did use a disk sander to clean up any wavy edges.
I needed a spray can holder for my shop. After looking around my shop I realized that I would rather have two or three smaller can holders than one large one. My plan is to have one at the spray booth for my spray finish. One by my workbench for spray adhesive. I might also make one for the small amount of spray paint I keep. That also gave me the chance to make it on the scroll saw and make a pattern for you guys.
I used 1/4" thick material to keep the weight down and that is what I had handy. 1/4" MDF would be inexpensive and plenty strong enough to hold six cans. As you can see from the picture I used both MDF and BB ply. I ran out of MDF and did not want to go to the home store. I'm going to paint it so the material will get covered. The assembly is mostly slot and tab so everything goes together easily.
IMPORTANT:
I want you to look closely at the next picture. There is a feature of this unit that you may not like. Note that the cans in the top rack sit on top of the cans in the bottom rack. I did this because I wanted to keep the unit as small and close to the wall as possible. I don't mind slightly lifting the top can to remove the bottom can. If you find that annoying then this is a pattern you may want to skip. With the bottom can, removed the top can just sits on the lower shelf.
The bottom shelf has a front lip so I can lay my Exacto knife or pencil. I like having extra pencils all over the shop. I am constantly forgetting to put my pencil back in my apron so it's nice to have some lying around.
Stephen Dinesen discusses how to choose the right clock insert:
One question that I get from time to time is how to select the right clock insert for a project. My friend, Stephen Dinesen the owner of Bear Woods has a video that I can point people to. It will give you the basics if you have never used a clock insert before.
This is not an ad. This is not an affiliate link. It is just information. Here is a link to Bear Woods Clock Insert offerings. They have a nice selection and I trust Stephen and his staff to provide good service.
$12 per sheet of 12 coins plus $3.50 shipping
Inlay with a 1" Forstner Bit.
The perfect way to sign your work.
Email Newsletter Readers: Remember that the Newsletter is just a copy of the daily blog post. To see the post in its proper formatting click this link. If you ever misplace a pattern or any item you see here you can always find it on the blog. Everything stays on the blog forever.
Products for your consideration:
Every Scrollsaw Workshop Pattern from 2007-2019 on DVD
This DVD has over 2,900 patterns published from 2007 thru 2019.
The DVD is $20 plus shipping. Ships to 60 countries around the world.
The DVD is $20 plus shipping. Ships to 60 countries around the world.
If you use the DVD on a Windows PC there is a simple viewer program to browse through the patterns.
The DVD also works fine on a MAC. The viewer program is not MAC compatible but there is an included PDF with all the patterns shown as thumbnails for easy viewing.
All the same file but in an easy to use thumb drive. The USB thumb drive option is $23 plus shipping.
Now Available on USB Thumb Drive
Don't have a DVD drive on your new computer. No problem. Buy the catalog on a USB thumb drive.All the same file but in an easy to use thumb drive. The USB thumb drive option is $23 plus shipping.
Want to create beautiful wooden vases on the scroll saw?
My two "Wooden Vases on the Scroll Saw" books make it easy.
The books are $12 each and available for instant download after purchase. Click for Video Demonstration.
My Sponsors:
Support the businesses that support our community.
Home of Pegas scroll saw blades.
Ad: Affiliate
WEN 3410 3-Speed Remote-Controlled Air Filtration System (300/350/400 CFM)
Don't let dangerous wood dust get in your lungs. Wear a mask and capture as much dust as possible. This WEN air filtration system helps me keep the air in my shop cleaner. Dust collection, dust filtration, and a mask are all important steps.
- Circulate the air in a 400 square foot room up to 7.5 times per hour
- Three-speed operation flows air at a rate of 300, 350, or 400 cubic feet per minute
- Includes a 1-micron filter and a 5-micron pre-filter, both of which can be easily replaced
- Programmable timer automatically shuts unit off after set number of minutes
- Remote control allows users to set timer, change speed and power the unit on and off from up to 26 feet away
