Angels Christmas Ornament Scroll Saw Pattern.

Download Below
Click Image to Enlarge.

This Christmas ornament has angels on each side. It is cut from 1/8" thick Baltic birch plywood to keep it light. I stack cut the angels so the ornament only takes minutes to complete. 

I get quite a few emails asking why I use Baltic birch plywood for ornaments. There are a few reasons. One is that the cost compared to hardwoods is less. When you are making many ornaments, the cost adds up with hardwood. 

I'm not saying that I don't use hardwoods for ornaments because I often do. When I want an ornament to have that special look of a beautiful hardwood then I grab the expensive stuff. I'll be honest with you that most people who receive the ornaments don't care what it is made from. Many even like the look of the plywood plies better. 

Some small ornaments can be a little fragile. BB ply is stronger than most hardwoods. Ornaments don't normally get handled a lot but they can break in storage when not packed well. The BB ply just holds up better.

I am completing lots of orders for personalized Christmas ornament patterns. If you need a supply of Baltic birch plywood, here is where I often order mine. These are affiliate links.

If you want to keep the weight of the ornament down then you can use 1/8" BB ply. 1/8" ply is a bit more difficult to cut so I suggest you go with the 1/4". If the project can be stack cut then using 1/8" works better. 

3 mm 1/8 x 12 x 12 Inch Premium Baltic Birch Plywood, Box of 16

If you want a more substantial ornament and easier to cut then you can go with the 1/4" BB ply.

This box of 12 sheets will net you around 48 ornaments.

6 mm 1/4 x 12 x 12 Inch Premium Baltic Birch Plywood, Box of 12.

These are sold through Amazon by Woodpeckers. I have had very good luck with these boards. I get very few defects. Every once in a while I get a couple boards that are a little warped. For ornaments that does not make much difference. I order several boxes of these boards a year so I have a pretty good feel for the quality.

I am completing the Personalized Ornament patterns at a decent rate. I think I am still on my three-day turnaround goal. Thanks for all the orders.

Personalized Christmas Ornament Patterns are ready to order:

I am ready to start taking Personalized Christmas Ornament Pattern orders.

I can do first or last names but remember that more than ten letters will be more difficult to cut.

The order form will take up to 20 names for people and 5 names for pets. If you need more than 20/5 then start a second order.

You will not pay until you have the patterns and are 100% happy with them. There will be an invoice sent with the patterns to your email. You will have the option to pay securely with a credit card or send a check to the included address.

I am shooting for a three-day turnaround but that may be difficult for a few days until I get all the kinks worked out. I'll do my best. You can set a bookmark for each of the order forms but I will post them almost every day until Christmas.

Click to order your Personalized Christmas Ornament Patterns.

$1 per/name with a 5 name minimum.

Click to order your Pet Personalized Christmas Ornaments

$2 per/name no minimum. 

=============================

Click to Order

$12 per sheet of 12 coins plus $3.50 shipping

Inlay with a 1" Forstner Bit.

The perfect way to sign your work.

Video Demonstration Link

- -

Email Newsletter Readers: Remember that the Newsletter is just a copy of the daily blog post. To see the post in its proper formatting click this link. If you ever misplace a pattern or any item you see here you can always find it on the blog. Everything stays on the blog forever. 

www.scrollsawworkshop.blogspot.com

Products for your consideration:

Every Scrollsaw Workshop Pattern from 2007-2019 on DVD

Purchase the entire Scrollsaw Workshop pattern catalog for offline access.

This DVD has over 2,900 patterns published from 2007 thru 2019.
The DVD is $20 plus shipping. Ships to 60 countries around the world.

Click here to Order. 

If you use the DVD on a Windows PC there is a simple viewer program to browse through the patterns.

The DVD also works fine on a MAC. The viewer program is not MAC compatible but there is an included PDF with all the patterns shown as thumbnails for easy viewing.

Now Available on USB Thumb Drive

Don't have a DVD drive on your new computer. No problem. Buy the catalog on a USB thumb drive.
All the same file but in an easy to use thumb drive. The USB thumb drive option is $23 plus shipping.

Buy Now. 

Unique Wooden Vases:
Want to create beautiful wooden vases on the scroll saw?

My two "Wooden Vases on the Scroll Saw" books make it easy.

The books are $12 each and available for instant download after purchase. Click for Video Demonstration.

The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this Button. Your support is greatly appreciated. 

My Sponsors:

Support the businesses that support our community.

Shop Bear Woods for your craft supply needs.

Home of Pegas scroll saw blades.

Visit Heritage Wood Specialties

for you scroll saw ready boards.

Seyco features the Seyco ST-21 scroll saw
Make sure you check out the Seyco Scrollers Drill

My Amazon Affiliate Link.