Download the Pattern Below
Butterfly Raised for a shadow effect
The backer board is 12" X 8.75"
The backer board is 12" X 8.75"
This butterfly took me just over two hours to cut. Not because it is such a complex pattern but because I cut it from 1/8" thick Baltic birch plywood.
Thin wood is very difficult to cut accurately. I normally stack cut at least two sheets to make it easier to cut. This time I decided to let the project be practice for cutting thin boards. Cutting thin woods builds your skills very fast. It can also drive you crazy if you have not tried it before.
Thin wood provides very little resistance to the blade. It is critical that you maintain control of the blade at all times. I have a video that discusses using the side and back of the blade to stop the cut. That technique will give you the ability to cut thin wood much easier. It will also improve your accuracy on all cuts.
I have a link to the video before so most of you have seen it. If you are new then check out this link to watch the video. The Most Important Scroll Saw Technique. It has been viewed over 150,000 times and I have received many emails telling me that it helps. The comments are turned off on this video because I was having trouble with spammers. I'll turn them back on if you are interested in leaving a comment on the video.
$12 per sheet of 12 coins plus $3.50 shipping
Inlay with a 1" Forstner Bit.
The perfect way to sign your work.
Email Newsletter Readers: Remember that the Newsletter is just a copy of the daily blog post. To see the post in its proper formatting click this link. If you ever misplace a pattern or any item you see here you can always find it on the blog. Everything stays on the blog forever.
Products for your consideration:
Every Scrollsaw Workshop Pattern from 2007-2020 on DVD
This DVD has over 3,310 patterns published from 2007 thru 2020.
The DVD is $20 plus shipping. Ships to 60 countries around the world.
The DVD is $20 plus shipping. Ships to 60 countries around the world.
If you use the DVD on a Windows PC there is a simple viewer program to browse through the patterns.
The DVD also works fine on a MAC. The viewer program is not MAC compatible but there is an included PDF with all the patterns shown as thumbnails for easy viewing.
All the same file but in an easy to use thumb drive. The USB thumb drive option is $23 plus shipping.
Now Available on USB Thumb Drive
Don't have a DVD drive on your new computer. No problem. Buy the catalog on a USB thumb drive.All the same file but in an easy to use thumb drive. The USB thumb drive option is $23 plus shipping.
Want to create beautiful wooden vases on the scroll saw?
My two "Wooden Vases on the Scroll Saw" books make it easy.
The books are $12 each and available for instant download after purchase. Click for Video Demonstration.
My Sponsors:
Support the businesses that support our community.
Home of Pegas scroll saw blades.
for you scroll saw ready boards.
Seyco features the Seyco ST-21 scroll saw
Make sure you check out the Seyco Scrollers Drill
Make sure you check out the Seyco Scrollers Drill
WEN 3410 3-Speed Remote-Controlled Air Filtration System (300/350/400 CFM)
- Includes a 1-micron filter and a 5-micron pre-filter, both of which can be easily replaced
- Dimensions – 17” L x 20.5” W x 10” H | Electrical Requirements – 120V, 60 Hz, 1A | Air flow – 300/350/400 cubic feet per minute | Cover rooms up to – 400 sq ft. | Noise rating – 50 to 60 dB
- Programmable timer automatically shuts unit off after set number of minutes
- Remote control allows users to set timer, change speed and power the unit on and off from up to 26 feet away
- RF remote system allows for operation from any angle of the room, even if direct line of vision is obstructed
