Click to Enlarge
Download the Pattern below
This Winter/Holiday themed candle holder will hold up to a 4" diameter candle. The parts are cut from 1/4" thick wood. I used Baltic birch plywood for this test cut but I suggest a nice hardwood to give the project a more finished look.
Where is the stand?
When I posted the layered nature scene the other day I had it sitting on a plate stand. Several people asked about the pattern for the stand. It was part of another pattern I published some time back. Here is the link to download that other pattern if you want to cut the stand.
Control the blade drift:
There is one issue when cutting with a scroll saw that many new scrollers have to adjust to. Because of the way scroll saw blades are made they cut at an angle in relation to the scroll saw table. We call this blade drift. Some blades are designed to minimize drift but they all drift at least a little. It takes a little practice but you soon get used to the drift and compensate.
There is an additional caution about blade drift that some people overlook. As scroll saw blades get dull the drift changes. This can mess with your mind because you have to compensate for the compensation. The obvious solution is to not let the blade get dull. Unfortunately, we rarely listen to that advice. We push the blade because we are in a hurry or are running low on blades. Sometimes we are just too ornery to take the time to stop and replace the blade.
The key is to recognize that the drift angle is changing. You will normally notice the change as you make a sharp turn. You will start rounding over the turn. You will start to cut off the line immediately after the turn. This is because the drift angle has changed and you are still compensating for the original drift.
As long as you understand what is happening you can make the adjustment in your mind and get back on the line.
Order your Personalized Christmas Ornament Patterns:
Personalized Christmas Ornament patterns are $1 each with a five ornament minimum. Each additional name adds an extra $1 to the total. 5 ornaments = $5. 20 ornaments = $20.
After you place the order I will complete the patterns and email them to you with a payment invoice. You have to be completely satisfied before you pay.
I do not offer blank patterns. This is one of the ways I support what I do. I ask that you please not use the template to create your own custom name patterns.
My goal is to have the orders complete in three days. I will keep you posted if there are delays.
$12 per sheet of 12 coins plus $3.50 shipping
Inlay with a 1" Forstner Bit.
The perfect way to sign your work.
Email Newsletter Readers: Remember that the Newsletter is just a copy of the daily blog post. To see the post in its proper formatting click this link. If you ever misplace a pattern or any item you see here you can always find it on the blog. Everything stays on the blog forever.
Products for your consideration:
Every Scrollsaw Workshop Pattern from 2007-2020 on DVD
This DVD has over 3,310 patterns published from 2007 thru 2020.
The DVD is $20 plus shipping. Ships to 60 countries around the world.
The DVD is $20 plus shipping. Ships to 60 countries around the world.
If you use the DVD on a Windows PC there is a simple viewer program to browse through the patterns.
The DVD also works fine on a MAC. The viewer program is not MAC compatible but there is an included PDF with all the patterns shown as thumbnails for easy viewing.
All the same file but in an easy to use thumb drive. The USB thumb drive option is $23 plus shipping.
Now Available on USB Thumb Drive
Don't have a DVD drive on your new computer. No problem. Buy the catalog on a USB thumb drive.All the same file but in an easy to use thumb drive. The USB thumb drive option is $23 plus shipping.
Want to create beautiful wooden vases on the scroll saw?
My two "Wooden Vases on the Scroll Saw" books make it easy.
The books are $12 each and available for instant download after purchase. Click for Video Demonstration.
My Sponsors:
Support the businesses that support our community.
Home of Pegas scroll saw blades.
for you scroll saw ready boards.
Seyco features the Seyco ST-21 scroll saw
Make sure you check out the Seyco Scrollers Drill
Make sure you check out the Seyco Scrollers Drill
This WEN entry-level scroll saw is priced at $103.52 on Amazon. I am not one who says you have to start with a $500 plus scroll saw. Almost none of us did. We all purchased an entry-level saw and then moved up when we can across limitations.
The WEN 3922 does have some limitations but so do all entry-level saws. I own this saw and have used it to make a few projects as a test. I would not want to replace my high-end scroll saws with it but I got the projects made. If you want to get into the hobby and are on a limited budget then the WEN is one of the better entry-level saws.
About this item
- Unique side panel flips open for easy-access blade changes
- Variable speed goes from 550 to 1600 strokes per minute
- Spacious 16-by-10-inch table bevels up to 45 degrees for angled cuts
- Cuts wood up to 2 inches thick with a 16-inch throat depth
- Features a thumb screw blade adapter for tool-free blade changes, a cast iron base, an air pump, a dust port, a foot lock clamp, and three 5-inch blades
