Do you have two-hundredths of a board foot or lumber in your shop? If you do then you have all you need to make this tiny finger joint earring box. The box is 1.75" X 1.5" X 1.25" and is cut from 1/8" thick Baltic birch plywood.
The finger joints are hand cut on the scroll saw so you have to cut with accuracy. With a little care, you can get these 1/8" finger joints pretty tight. You can always undercut the fingers then sneak up on the fit by nibbling away with the blade until the fit is just right.
My wife, Patty likes to keep a little dish beside her sink to hold her earring while she gets ready to go out. She happened to mention that she could also use a small box to sit beside her living room chair to place her earring so she would not lose them. That's where this box idea came from. I also wanted to test making very tiny finger joints on the scroll saw.
I used a #2/0 blade and turned the speed of the saw down to about 50%. I stack cut the sides of the box. It's easier to cut wood this time when you stack cut and it speeds things up a bit.
I included several simple ornaments to put on top of the box. You can also just leave the box plain.
Way behind on Email. Sorry.
Hey folks. I apologize for not answering all of your emails. This time of year my inbox really goes crazy. I am slowly working through as many as I can get to. Unfortunately, some of the email does not get a reply. I just run out of time. I am truly sorry I can't answer each of them. I'll do my best.
As a favor to me please limit your email message to a short paragraph. Email that is multi-paragraph is just too much for me to handle this time of year. Thanks for your understanding.
I tried to get my dog, Holly to help me out with the email backlog but she demanded more doggie treats than I could afford. Good help is hard to get.
YouTube channel that you may like:
Some of you know that I am a YouTube junkie. I subscribe to dozens of channels and consume more than is a reasonable amount of hours each week watching them. I love watching woodworker, crafters, artist, and creators make things.
This young lady from The Square To Spare channel is just excellent at miniature crafting. If you enjoy this type of work check out her video and consider subscribing to her channel.
$12 per sheet of 12 coins plus $3.50 shipping
Inlay with a 1" Forstner Bit.
The perfect way to sign your work.
Email Newsletter Readers: Remember that the Newsletter is just a copy of the daily blog post. To see the post in it's proper formatting click this link. If you ever misplace a pattern or any item you see here you can always find it on the blog. Everything stays on the blog forever.
Products for your consideration:
Scroll Saw Pattern Design Tutorial: DVD
Let me teach you to create a beautiful wooden portrait pattern. I will show you everything you need from start to finish. The video will show you the free software program you can download for Windows or Mac OS. I will show you how to install the program and configure it for best results.
Let me teach you to create a beautiful wooden portrait pattern. I will show you everything you need from start to finish. The video will show you the free software program you can download for Windows or Mac OS. I will show you how to install the program and configure it for best results.
Then I will show you the technique to take your photograph and make a pattern from it. When the pattern is complete we will go in the shop and cut it.
The DVD is $10 plus shipping. This is a data DVD that you will use on your computer to watch the video tutorial
Every Scrollsaw Workshop Pattern from 2007-2017 in DVD
Purchase the entire Scrollsaw Workshop pattern catalog for offline access.
This DVD has 2,300 patterns published from 2007 thru 2017.
The DVD is $20 plus shipping. Ships to 60 countries around the world.
The DVD is $20 plus shipping. Ships to 60 countries around the world.
If you use the DVD on a Windows PC there is a simple viewer program to browse through the patterns.
The DVD also works fine on a MAC. The viewer program is not MAC compatible but there is an included PDF with all the patterns shown as thumbnails for easy viewing.
Want to create beautiful wooden vases on the scroll saw?
My two "Wooden Vases on the Scroll Saw" books make it easy.
The books are $12 each and available for instant download after purchase. Click for Video Demonstration.
My Sponsors:
Support the businesses who support our community.
Home of Pegas scroll saw blades.
Ad: AffiliateHelen Zora 18 Note Windup Gold Plating Clockwork Mechanism DIY Music Box Movement Many Songs for Choose
Several melodies to choose from.
- Full playing time: 2.5-3 Minutes
- Thythm: 18 Notes
- Dimension: About 5.0cm*4.5cm*2.0cm (1.97"*1.77"*0.78")
- Model: windup
- Packing include: Movement+Screws+Key
