Download the Pattern below
Optional Paint.
This kitchen sign pattern comes in two sizes. The small sign is 10" long and the large sign is 13" long.
The pattern has three layers, each 1/4" thick. That is completely optional. You can just use the main layer if you like and make it thicker.
I sit and Stand at the Scroll Saw:
A question I get from time to time is if it is better to stand and scroll or sit and scroll. This discussion usually leads to how high the scroll saw stand should be and/or how high the stool needs to be.
I sit most of the time while cutting. I do have some projects where I need to stand. If the board is large and has a large rotation, I will stand so I can position myself further or closer to the table as needed. I need to get my belly out of the way when the board hangs further off the front of the table. This is easier for me when standing.
This is not medical advice. For me, I have found that when I am sitting, I want my elbows to be just below the surface of the table. I want the rear of the saw higher than the front by a couple of inches. That is the position I feel the most comfortable and my lower back pain does not happen as often when I am in this position. I elevate the back of the saw so I don't have to lean forward to see the pattern line.
When I do stand to cut my elbows are a little higher. This is mostly due to the fact that I use the manufacturer's stands that are sold for the saws and I am a bit taller than average. My elbows end up about three inches above the table. I'm not sure how this posture would affect my back pain because I never stand and cut for long periods of time. It would be rare for me to stand and cut for more than an hour. I often sit and scroll for several hours with limited breaks.
Below is a picture I found online that shows proper posture for seated and standing at a work desk. I assume this would hold true for working at the scroll saw. In our case, the table of our scroll saw does not change height like they show in this picture. That is why I use a tall stool to elevate my body so my elbows are in the correct position.
One experiment I have on my to-do list is to buy one of the motor-driven standing desks. I want to put a scroll saw on it and see how comfortable this makes different postures. The one in the photo below says it will support 154lbs. That will handle the scroll saw's weight but I'm not sure if it will handle the vibration and keep the saw steady.
This table is 48" X 30" and can elevate from 28" to 47.6" in height. It's not inexpensive at $250 but if back or leg pain is a problem then it may be worth the investment. I think you could also get at least two scroll saws mounted on this table, Maybe a sanding station. Sanding is another activity that can take extended time and it helps to be comfortable.
$12 per sheet of 12 coins plus $3.50 shipping
Inlay with a 1" Forstner Bit.
The perfect way to sign your work.
Email Newsletter Readers: Remember that the Newsletter is just a copy of the daily blog post. To see the post in its proper formatting click this link. If you ever misplace a pattern or any item you see here you can always find it on the blog. Everything stays on the blog forever.
Products for your consideration:
Every Scrollsaw Workshop Pattern from 2007-2020 on DVD
This DVD has over 3,310 patterns published from 2007 thru 2020.
The DVD is $20 plus shipping. Ships to 60 countries around the world.
The DVD is $20 plus shipping. Ships to 60 countries around the world.
If you use the DVD on a Windows PC there is a simple viewer program to browse through the patterns.
The DVD also works fine on a MAC. The viewer program is not MAC compatible but there is an included PDF with all the patterns shown as thumbnails for easy viewing.
All the same file but in an easy to use thumb drive. The USB thumb drive option is $23 plus shipping.
Now Available on USB Thumb Drive
Don't have a DVD drive on your new computer. No problem. Buy the catalog on a USB thumb drive.All the same file but in an easy to use thumb drive. The USB thumb drive option is $23 plus shipping.
Want to create beautiful wooden vases on the scroll saw?
My two "Wooden Vases on the Scroll Saw" books make it easy.
The books are $12 each and available for instant download after purchase. Click for Video Demonstration.
My Sponsors:
Support the businesses that support our community.
Home of Pegas scroll saw blades.
for you scroll saw ready boards.
Seyco features the Seyco ST-21 scroll saw
Make sure you check out the Seyco Scrollers Drill
Make sure you check out the Seyco Scrollers Drill
Pegas Scroll Saw Blades
I have said it before and I will say it again. The biggest upgrade you can do for your scroll saw is to use the best blades.
The Pegas blades are made in Switzerland to the highest standards. They are sharp and they last longer. The best news is that they don't cost more than poor-quality blades.
My online supplier of scroll saw blades is Bear Woods. You can trust them to give you good service and a quality product.
